Product Description
Introduction of Explosion Proof Gas Leak Detector
The GM-X01 is a fixed point-type CO monitoring device featuring a detachable pluggable sensor module for easy maintenance. It supports 24-hour continuous gas detection, real-time concentration display, infrared remote calibration, and two-stage automatic alarming. With the authoritative Ex db IIC T6 Gb explosion-proof rating, it suits Zone 1/2 hazardous areas and IIA/IIB/IIC gas environments, fully complying with IEC safety standards adopted across Southeast Asia.
Equipped with a high-sensitivity electrochemical sensor and natural diffusion sampling, the detector covers a 0–1000ppm detection range with a ≤30s fast response. Boasting an IP66 waterproof and dustproof die-cast aluminum alloy shell, it stably operates at -10℃ to +55℃ and ≤95% non-condensing humidity, adapting perfectly to Southeast Asia’s tropical harsh climates. It adopts DC24V wide-voltage power supply and standard RS485 (9600bps) signal output for seamless connection with industrial monitoring systems.
Feature of Explosion Proof Gas Leak Detector
1) Superior Harsh Environment Adaptability
The IP66 rugged shell and anti-corrosion structure resist tropical rain, high humidity, and coastal salt spray. Its wide temperature and humidity tolerance eliminates common failures of ordinary detectors in Southeast Asian industrial and coastal sites, ensuring long-term stable operation.
2) Accurate & Fast Safety Monitoring
Strict error control guarantees reliable detection data. The dual-stage alarm system (200ppm low alarm / 500ppm high alarm) with 5+ meter visible alarm lights enables timely risk alerts, effectively preventing CO poisoning and explosion accidents.
3) Low Operation & Maintenance Costs
The pluggable sensor design supports tool-free quick replacement and calibration, cutting labor and maintenance costs. The 3-year sensor lifespan and ultra-low 10mA max working current reduce long-term operational expenses, ideal for local SMEs’ cost control needs.
4) Easy Operation & Strong Compatibility
Lightweight (616g) and compact for fast installation, it features a clear display and infrared remote debugging to lower operational thresholds for on-site staff. Standard RS485 output ensures full compatibility with mainstream PLC and centralized monitoring systems for intelligent industrial management.
5) Full Regional Compliance
Certified with international explosion-proof standards, the device meets local Southeast Asian industrial safety regulations, helping enterprises pass official inspections and eliminate compliance risks.
Detail photos of Explosion Proof Gas Leak Detector



Product parameters of Explosion Proof Gas Leak Detector
| Parameter Name | Technical Specification |
| Product Name | GM-X01 Industrial and Commercial Point-Type Combustible Gas Detector |
| Explosion-proof Type | Flameproof |
| Explosion-proof Mark | Ex db IIC T6 Gb |
| Test Gas | CO (Carbon Monoxide) |
| Sensor Type | Electrochemical Sensor |
| Sampling Method | Natural Diffusion |
| Detection Range | 0~1000×10-6 (Volume Fraction) |
| Operating Voltage | DC24V(±15%) |
| Operating Mode | Continuous Detection |
| Range Indication Deviation | Allowable Error: ±80×10-6 (Volume Fraction) |
| Alarm Value Setting Range (Two-stage Alarm) | Factory default low-level alarm setting value: 200×10-6 (volume fraction); Factory default high-level alarm setting value: 500×10-6 (volume fraction). |
| Alarm Error | ≤±50×10-6 (Volume Fraction) |
| Alarm Light Visibility | > 5m (In Darkness) |
| Response Time | ≤30s |
| Sensor Service Life | ≤3 years under normal monitoring environment |
| Housing Material | Die-cast Aluminum Alloy |
| Overall Dimension | Approx. 136.8mm×112.5mm×73mm |
| Product Weight | Approx. 616g |
| Maximum Operating Current | 10mA |
| Output Signal | RS485 |
| Baud Rate | 9600 bps |
| Temperature Range | -10℃~+55℃ |
| Relative Humidity | ≤95% (Non-condensing) |
| Atmospheric Pressure | 86 kPa~106kPa |
| Ingress Protection Rating | IP66 |
| Application Site | Suitable for Zone 1 and Zone 2, IIA, IIB and IIC gas environments |
FAQ about Explosion Proof Gas Leak Detector
Q1: What scenarios is it suitable for?
A1: It applies to petrochemical plants, manufacturing workshops, gas rooms, chemical storage zones, and all Zone 1/2 hazardous commercial and industrial sites requiring continuous CO monitoring.
Q2: Can it work in Southeast Asia’s tropical climate?
A2: Yes. IP66 protection and wide temperature/humidity adaptability enable stable operation in year-round high heat, heavy rain, and humid coastal environments without data drift or failure.
Q3: Is it compliant with local safety rules?
A3: Fully compliant with IEC explosion-proof standards and Southeast Asian industrial safety specifications, supporting smooth safety audits.
Q4: Is maintenance complicated and costly?
A4: No. Tool-free sensor replacement, long service life, and low power consumption greatly reduce maintenance frequency and overall costs.
Q5: Can it connect to existing monitoring systems?
A5: Yes. Standard RS485 signal output supports seamless docking with most industrial monitoring and PLC systems for intelligent remote management.
Q6: Is the alarm system sensitive enough?
A6: The 30s fast response and adjustable dual-stage alarms capture trace CO leakage instantly, with high-visibility alarms ensuring timely on-site risk response.
English
Español
Português
русский
français
日本語
Deutsch
Tiếng Việt
Italiano
Nederlands
ไทย
Polski
한국어
Svenska
magyar
Malay
বাংলা
Dansk
Suomi
Pilipino
Gaeilge
عربى
norsk
اردو
čeština
Ελληνικά
Українська
فارسی
தமிழ்
తెలుగు
नेपाली
Burmese
български
ລາວ
Latine
Қазақ
Azərbaycan
slovenský
Македонски
Lietuvos
Eesti Keel
Română
Slovenski
Српски
Afrikaans
Беларус
Монгол хэл
O'zbek
Sundanese
Javanese


