Product Description
Introduction of Industrial Combustible Gas Detector
The GM-X01 industrial and commercial point-type combustible gas detector is a high-reliability monitoring device tailored for industrial flammable gas leakage scenarios. It consists of a main unit and a pluggable gas sensor module, supporting real-time, continuous monitoring of carbon monoxide (CO) concentration and equipment status via a built-in display. Designed to meet stringent industrial safety standards, this detector is applicable for Zone 1/2 hazardous areas and IIA, IIB, IIC gas environments with a temperature group ranging from T1 to T6.
Engineered to adapt to complex working conditions prevalent in Southeast Asia’s booming manufacturing, chemical, and energy industries, the device delivers stable 24/7 continuous detection. It features two-level adjustable alarm thresholds and professional remote calibration functions, solving core safety monitoring pain points for local industrial and commercial sites.
Feature of Industrial Combustible Gas Detector
1) Superior Environmental Adaptability for Tropical Climates
Southeast Asia’s year-round high humidity and temperature fluctuations often cause sensor drift and false alarms in ordinary detectors. The GM-X01 operates stably at -10℃ to +55℃ and ≤95% non-condensing humidity, with an IP66 high-protection grade and die-cast aluminum alloy housing. It effectively resists moisture, dust, and corrosion, avoiding frequent equipment failures caused by harsh tropical environments and reducing climate-induced monitoring blind spots.
2) Professional Explosion-Proof & High-Precision Detection
Certified with Ex db IIC T6 Gb explosion-proof grade, the device adapts to most high-risk flammable gas scenarios in Southeast Asia’s petrochemical, processing, and industrial parks. Equipped with a high-sensitivity electrochemical sensor and natural diffusion sampling mode, it supports a 0–1000ppm detection range. With a response time of ≤30s and controllable alarm error within ±50ppm, it ensures rapid and accurate leakage warning, meeting local industrial safety compliance standards.
3) Low Maintenance & Labor-Saving Operation
Facing the regional shortage of professional technical maintenance personnel, the detector adopts a pluggable sensor module design, enabling quick replacement without complex professional operations. It supports infrared remote zero adjustment and calibration, eliminating the need for on-site disassembly. The sensor boasts a 3-year service life, greatly reducing long-term maintenance frequency and labor costs for enterprises.
4) Stable Signal & Cost-Effective Deployment
It adopts mature RS485 signal output with a 9600bps baud rate, ensuring stable and efficient data transmission for centralized system networking. With low power consumption (maximum working current 10mA) and a compact, lightweight structure, it lowers on-site installation difficulty and operational energy costs. It solves the high deployment and operation cost pain points of local SMEs, achieving a balance between high performance and cost control.
Detail photos of Industrial Combustible Gas Detector



Product parameters of Industrial Combustible Gas Detector
| Parameter Name | Technical Specification |
| Product Name | GM-X01 Industrial and Commercial Point-Type Combustible Gas Detector |
| Explosion-proof Type | Flameproof |
| Explosion-proof Mark | Ex db IIC T6 Gb |
| Test Gas | CO (Carbon Monoxide) |
| Sensor Type | Electrochemical Sensor |
| Sampling Method | Natural Diffusion |
| Detection Range | 0~1000×10-6 (Volume Fraction) |
| Operating Voltage | DC24V(±15%) |
| Operating Mode | Continuous Detection |
| Range Indication Deviation | Allowable Error: ±80×10-6 (Volume Fraction) |
| Alarm Value Setting Range (Two-stage Alarm) | Factory default low-level alarm setting value: 200×10-6 (volume fraction); Factory default high-level alarm setting value: 500×10-6 (volume fraction). |
| Alarm Error | ≤±50×10-6 (Volume Fraction) |
| Alarm Light Visibility | > 5m (In Darkness) |
| Response Time | ≤30s |
| Sensor Service Life | ≤3 years under normal monitoring environment |
| Housing Material | Die-cast Aluminum Alloy |
| Overall Dimension | Approx. 136.8mm×112.5mm×73mm |
| Product Weight | Approx. 616g |
| Maximum Operating Current | 10mA |
| Output Signal | RS485 |
| Baud Rate | 9600 bps |
| Temperature Range | -10℃~+55℃ |
| Relative Humidity | ≤95% (Non-condensing) |
| Atmospheric Pressure | 86 kPa~106kPa |
| Ingress Protection Rating | IP66 |
| Application Site | Suitable for Zone 1 and Zone 2, IIA, IIB and IIC gas environments |
FAQ about Industrial Combustible Gas Detector
Q1: Is the detector suitable for Southeast Asian tropical high humidity and high temperature working environments?
A1: Absolutely. The detector is professionally optimized for harsh tropical climates. It works stably in temperatures from -10℃ to +55℃ and 95% non-condensing high humidity. The IP66 protection grade and corrosion-resistant aluminum housing effectively prevent moisture and dust damage, avoiding false alarms and failures caused by extreme weather, ensuring long-term stable operation in Southeast Asian industrial sites.
Q2: Does it meet local Southeast Asian industrial explosion-proof safety standards?
A2: Yes. It features authoritative Ex db IIC T6 Gb explosion-proof certification, applicable to Zone 1/2 hazardous areas and IIA/IIB/IIC flammable gas environments. It covers mainstream high-risk industrial scenarios in Southeast Asia and fully complies with local industrial safety supervision and compliance requirements.
Q3: Is daily maintenance complicated for non-professional local operators?
A3: No. The pluggable sensor module supports tool-free quick replacement. Infrared remote control realizes one-click zero adjustment, calibration and parameter setting, without professional debugging skills. The 3-year long-life sensor minimizes maintenance cycles, perfectly adapting to the local shortage of professional technical personnel.
Q4: Can it adapt to on-site centralized monitoring system networking?
A4: Sure. Equipped with standard RS485 output and stable 9600bps baud rate, it supports seamless connection with mainstream industrial centralized monitoring systems. It delivers real-time concentration data and status feedback, helping enterprises realize intelligent, unified gas safety management.
English
Español
Português
русский
français
日本語
Deutsch
Tiếng Việt
Italiano
Nederlands
ไทย
Polski
한국어
Svenska
magyar
Malay
বাংলা
Dansk
Suomi
Pilipino
Gaeilge
عربى
norsk
اردو
čeština
Ελληνικά
Українська
فارسی
தமிழ்
తెలుగు
नेपाली
Burmese
български
ລາວ
Latine
Қазақ
Azərbaycan
slovenský
Македонски
Lietuvos
Eesti Keel
Română
Slovenski
Српски
Afrikaans
Беларус
Монгол хэл
O'zbek
Sundanese
Javanese


